report代做 | security | Network | network代写 | 代写database – network

network

report代做 | security | Network | network代写 | 代写database – 这个题目属于一个Network的代写任务, 涵盖了report/security/Network/network/database等程序代做方面

security代做 网络安全 网安代写 计算机网络安全

Semester 2 2018 (^) Version 1.0 : TAFE Queensland is collecting your personal information in accordance with NVR (Standard SNR 15.5) for assessment purposes. The information will only be accessed by authorised employees of TAFE Queensland. Some of this information may be given to the National VET Regulator (ASQA) and/or Department of Education, Training and Employment for audit and/or reporting purposes. Your information will not be given to any other person or agency unless you have given us written permission or we are required by law.

ASSESSMENT INSTRUCTIONS

Qualification Code & Name Stream / Specialisation
ICA50411 Diploma of IT, Networking
Unit/s of Competency Code Unit/s of Competency Name
ICTNWK 529 Install and manage complex ICT networks
Assessment Task Number Assessment Name
Assessment 3 of 3 Portfolio part 2  Initiating services, VPN and the final report
Due Date
Submission Details (if applicable)
Your teacher will advise if this assessment is to be completed online in the Learning Management System (LMS).
Instructions to students

This task is designed to assess your knowledge and skills for initiating services. You will be advised by your instructor when to take this assessment.

This assessment has four parts:

  1. describe commands and processes required to setup a DHCP server
  2. describe commands and processes required to setup a DNS server
  3. describe commands and processes required to setup other services
  4. configure a Windows Server to be a domain controller and enable Active Directory.
  5. provide information to the manager of Mavis Car Rental
  6. configure remote access
  7. finalise the design and deliver it to Mavis.

First you should review the case study. Again, take notes of important points and refer to your notes during the assessment.

Resource Requirements for Assessment

For the assessment of this unit of competency the following resources / equipment are required: Username and Password for online learning environment.

Range and Conditions of Assessment

The student must log in to the online learning environment as instructed by the teacher. Students must ensure they use their secure and unique username and password to complete this assessment task.

There are four ( 4 ) tasks and all must be answered correctly to achieve a satisfactory result for this assessment. Students will be able to sit the assessment a second time if they are not successful on the first attempt.

Students can use any of the learning resources provided to complete the tasks.

It is recommended that students take no longer than an hour to complete this assessment. Note that the online learning environment may have time restrictions and students should save their work regularly.

Students must contact their teacher immediately if they experience any difficulties with completing this assessment.

Evidence required to be submitted

The students attempt of the assessment will be recorded by the online learning environment; otherwise, record on this document.

Marking criteria to achieve a satisfactory result

For more information, refer to the Marking Criteria.

Semester 2 2018 (^) Version 1.0 Dated 13th July 2018

1. Describe commands and processes required to setup a DHCP server.
The first time that a Windows client (with DHCP enabled) attempts to join a network, it automatically follows an
initialization process to obtain a lease from a DHCP server. What is the lease process?
a) IP lease request, IP lease acknowledgment
b) IP lease offers, IP lease acknowledgment
c) IP lease offers, IP lease selection, IP lease acknowledgment
d) IP lease request, IP lease offers, IP lease selection, IP lease acknowledgment
2. Describe commands and processes required to setup a DNS server.
a) Domain Name System (DNS) is a distributed database used by TCP/IP applications to translate
………………into corresponding …………….
b) Draw a picture to describe the top level DNS Domain Name Hierarchy.

Semester 2 2018 (^) Version 1.0 Dated 13th July 2018

3. Describe commands and processes required to setup other services.
a) SMTP: A user opens a …………… connection to an SMTP server on a remote host and attempts to send mail
across the connection. The SMTP server listens for a TCP connection on port …… and the SMTP user initiates
a connection on that port.
i. TCP, 21
ii. UDP, 53
iii. TCP, 25
iv. UDP, 123
b) LDAP: Which service is used in a Windows server to manage users, groups and permissions in a network?
i. active directory
ii. Samba
iii. LDAP
iv. disk quotas
c) Which command starts the process of installing active directory domain services?
i. active directory domain and users
ii. DC promo
iii. mkdir
iv. ipconfig
4. Configure a Windows Server to be a domain controller and enable Active Directory.
a) What is the command to start the process?
b) What is the procedure for adding users?
c) How would you test the new user accounts?
d) How would you set permissions for the new users private files?

####### .

Semester 2 2018 (^) Version 1.0 Dated 13th July 2018

5. Provide information to the manager of Mavis Car Rental.
a) Explain how the Mavis network can be monitored.
b) Describe the required protocols for monitoring and appropriate monitoring software.
c) Recommend software that Mavis can use to transmit voice and video over internet.
6. Configure remote access.
List the steps required to configure a VPN server:
7. Finalise the design and deliver it to Mavis.
In this task you will put all of the work that you have done into a single, final document which will be submitted to Mavis
for consideration. Mavis has asked several companies to submit proposals, so you are competing for the contract to
build the network. Your goal is to submit a report which will earn the contract for your consulting firm.
To complete this task, you will submit a final design proposal to Mavis which will include:
a) a 1-2 page document describing your proposed perimeter security design
b) a simple logical diagram of your proposed perimeter security design
c) a simple physical diagram of your proposed security design which shows what equipment is on what racks in what
server rooms

Semester 2 2018

Version 1.0  Dated 13th July 2018

ASSESSMENT SUMMARY

Student Name Student Number
Qualification Code & Name Stream / Specialisation
ICA50411 Diploma of IT, Networking
Unit/s of Competency Code Unit/s of Competency Name
ICTNWK 529 Install and manage complex ICT networks
Assessment Task Number Assessment Name
Assessment 3 of 3 Portfolio part 2  Initiating services, VPN and the final report
Student Declaration
I declare that this assessment is my own work. Any ideas and comments made by other people have been acknowledged as references. I
understand that if this statement is found to be false, it will be regarded as misconduct and will be subject to disciplinary action as outlined in
the TAFE Queensland Student Rules. I understand that by me emailing this assessment item, I agree to this Declaration in lieu of a written
signature.
Student Signature Date

####### / /

MARKING CRITERIA

Attempt Result Date

####### 1

st
Attempt Satisfactory Unsatisfactory / / 20
2 nd Attempt Satisfactory Unsatisfactory / / 20
Supplementary (apprentice / trainees only) Satisfactory Unsatisfactory / / 20
1
st
Attempt

####### 2

nd
Attempt
Did the student satisfactorily: S U S U
  1. summarise internet protocol (IP) addressing and network configuration
  2. summarise and apply service configuration, including DNS
  3. summarise and apply service configuration, including DHCP
  4. outline the purpose of user authentication and directory services
  5. recognises and interprets technical and organisational documentation
  6. summarise network infrastructure
  7. describe the activation and configuration of directory services
  8. configure permissions and manage users and groups in a network
9. describe voice over internet protocol (VoIP)
10. describe virtual private network (VPN)
11. identify and describe troubleshooting tools and techniques, including network diagnostic utilities
12. install and configure remote access services
13. complete network documentation according to organisational standards
Reasonable Adjustment applied to assessment (if yes record details )
No Yes Details:
Assessor Name Assessor Signature
Summary of Feedback / Action Plan